卫星用两种单相流体回路方案对比研究

单相流体回路系统是航天器主动热控技术中的一种重要方式。文章概述了流体回路的工作原理及理论基础，总结了单相流体回路的设计思路，结合某卫星型号，设计了两种流体回路方案，在SINDA／FLUINT中建立数值仿真模型进行分析计算，并比较了两种方案的应用性能。结果显示，将单相流体回路系统应用于卫星，可取得较好的控温效果。     

高原机场终端区飞行闭环稳定性分析

分析了高原机场终端区飞行的特殊性和影响高原机场飞行闭环稳定性的各种不利因素,指出了在高原机场缺氧条件下对飞行员数学模型修正的必要性和修正方法.采用等效闭环系统方法分析飞机在高原机场环境下的闭环稳定性,利用该思路可以用常规的分析方法研究高原机场飞行员缺氧条件下的闭环稳定性.     

基于特征模型的火箭发动机伺服控制系统设计

以新型大推力火箭发动机为研究对象,提出了基于特征模型的伺服系统控制器设计方法。首先,介绍了特征建模理论并讨论了特征模型参数范围;其次,采用人工蜂群算法实时估计火箭发动机伺服系统特征模型参数,使其满足特征模型输出与实际系统输出特性等价条件;最后,使用黄金分割自适应控制律保证系统在参数估计过程中的闭环稳定性,同时引入前馈跟踪控制律,逻辑积分控制律和逻辑微分控制律使伺服控制系统快速、精确跟踪线位移指令并改善动态性能。仿真结果表明,设计的火箭发动机伺服控制系统指令跟踪精度高,动态特性良好,鲁棒性强。     

烧结双多孔介质中沸腾换热的实验研究

对由铜粉烧结而成的三种双多孔介质结构进行了沸腾换热的实验。为了便于比较，同时对两种单多孔介质进行了沸腾换热实验。结果发现：当双多孔介质的微孔径和单多孔介质的孔径相同时，双多孔介质的换热系数和临界热流密度比单多孔介质高得多；对于同样微孔径的双多孔介质，存在最佳的粗孔径，其换热系数和临界热流密度最大；当逆静水压头减小的时候，换热系数和临界热流密度增加。     

Design and Application of Discrete Sliding Mode Control with RBF Network-based Switching Law

This article proposes a novel approach combining exponential-reaching-law-based equivalent control law with radial basis function (RBF) network-based switching law to strengthen the sliding mode control (SMC) tracking capacity for systems with uncertainties and disturbances. First, SMC discrete equivalent control law is designed on the basis of the nominal model of the system and the adaptive exponential reaching law, and subsequently, stability of the algorithm is analyzed. Second, RBF network is used to form the switching law in a direct and online manner with sliding-mode-related inputs and by approximating evaluation function; and the method to adjust its parameters is devised. Finally, comparable experiments are carried out to verify the application of the proposed approach to an inner-axis driven by a direct current (DC) torque motor through extra-low speed servo for a high precision flight simulator, and the axis works under deteriorating conditions such as periodically fluctuating torques of motor, nonlinear friction, and time-varying model parameters. The results show that the combined SMC can effectively improve the servo performance, for instance, to a stable 0.000 08 (°)/s speed response, the tracking error would be within 0.000 08° in 98% of operating times. Moreover, the hybrid nature of the approach imparts the RBF network the features of removing offline training and ease to set initial parameters.     

三轴陀螺稳定平台伺服回路全姿态解耦及变增益控制方法

在载体大机动飞行背景下，要求惯性平台具备全姿态的功能。国内现有的三轴陀螺稳定平台（简称三轴平台）不具备全姿态的功能，在内框架增加了限位挡钉以限制内框架角的工作范围，主要是基于内框架角不能工作在接近于?90?的认识。为了准确描述全姿态条件下三轴平台的运动规律，本文指出了传统动力学推导过程中的不足之处，重新建立了三轴平台的动力学模型，基于该模型给出了非奇异的全姿态伺服回路并提出了一种新的全姿态解耦方法，包括力矩解耦和转动惯量解耦。最后，针对转动惯量在框架转动过程中非定值的问题，提出了基于H∞控制理论的变增益控制策略。仿真结果表明，变增益控制器相对定常参数控制器可显著改善三轴平台伺服回路控制的性能。     

可展开式辐射器热控对航天器轨道调整的适应性分析

为提高航天器热控系统对轨道调整的适应能力，本文研究了与流体回路耦合的可展开式辐射器热控方案在不同轨道高度下的热控性能，分析了不同轨道高度时辐射器面临的热环境的影响，在不同轨道高度下比较了固定辐射器与可展开辐射器的热控特性。结果表明，随着辐射器展开角度的变化，辐射器吸收的空间热流随之发生变化，从而对热控系统的散热能力带来直接影响，调节辐射器的角度可以扩大其对外散热能力。在工程应用中，基于热控流体回路，通过调节可展开式辐射器的展开角度，可以有效提高航天器的轨道热适应能力。     

一种改进的防空导弹侧向回路稳定控制结构分析

基于复合稳定控制结构,对某防空导弹侧向回路过载反馈通道的结构进行了改进。基于理论分析,结合工程应用实际进行了数学仿真验证。结果表明:在保持足够稳定裕度的前提下,改进结构的系统快速性好,鲁棒性更优。     

基于极大似然估计器的GNSS矢量跟踪算法

矢量跟踪是一种将全球导航卫星系统(GNSS)接收机的信号跟踪与导航解算融为一体的跟踪算法。传统的基于矢量延迟/频率锁定环(VDFLL)的跟踪算法普遍采用延迟锁定环(DLL)和锁频环(FLL)鉴别器计算伪距和伪距率偏差观测量,由于锁频环鉴别器存在近似误差和一步延迟效应,在高动态环境下容易造成环路失锁。从直接估计卫星信号特征参数的角度出发,基于中频信号模型构建码相位和载波多普勒的极大似然代价函数,采用非迭代估计算法得到各通道码相位和多普勒频移的估计偏差,转换为卡尔曼滤波器的观测矢量,提出一种基于极大似然估计器(MLE)的矢量跟踪算法。理论分析和仿真结果表明:新算法结合了极大似然估计和矢量跟踪的优点,克服了FLL的延迟效应,与基于VDFLL的矢量环路相比,高动态环境下的跟踪稳定性更好,可以对被遮挡的卫星保持持续的跟踪。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.